Hi Guys,
I just pulled the distributor out of a motor and replaced it with a 123 Distributor. I'm not fully understanding the timing and curve programming and I was wondering if anyone out there could share there expertise.
The car was running great with the old distributor but, I purchased the Bluetooth version so we could use the PIN unlock and other features.
Any guidance from 123Dizzy - 101 to advanced would be very appreciated.
Thanks,
Mike
I used curve 2 on my 2056 L-Jet, works fine.
Ed at 1-2-3 Ignitions isca great source, his number is (440) 668-8164
I talked with him twice with good results
Thanks Jim, I will give him a call
Mike
THis is what I used based on input from McMark. I don’t use the vacuum advance function. This on a 1911cc with Weber 40s
Thanks for all the help here Gents.
We were able to get it in and running and it feels real good.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)