Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Getting close to finishing my 3 year project

Posted by: shane Jul 20 2019, 11:14 PM

Is it just me or do you have to take the VR off to remove the relay/fuse cover?

Posted by: michael7810 Jul 21 2019, 08:52 AM

I remove the screw that holds the panel in the rails to get mine off.

Posted by: 914Sixer Jul 21 2019, 01:22 PM

Some of the covers have warped and have been distorted making it difficult to remove voltage regulator.

Posted by: shane Jul 21 2019, 02:07 PM

QUOTE(914Sixer @ Jul 21 2019, 12:22 PM)

Some of the covers have warped and have been distorted making it difficult to remove voltage regulator.

On mine there is a tab on the cover that fits under the VR and runs the whole distance of the backside of it. You have to put the cover on first then the VR. And reverse to take the cover off. Not a huge deal but I also have to move the heater blower to get at the screws to remove the VR to remove the cover. Was just thinking about cutting that tab off so I can simply remove just the cover. But maybe mine is warped and that tab isn’t supposed to go under the VR in the first place?