Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 3.0 cis swap done right, I need a little help before I blow a gasket! LOL!

Posted by: andrewpsnow Aug 17 2019, 07:36 PM

Posted by: mepstein Aug 17 2019, 07:44 PM

Perry
@http://www.914world.com/bbs2/index.php?showuser=439

Posted by: burton73 Aug 17 2019, 07:50 PM

Make sure you have a blow off flapper valve so you CIS box will not blow up the airbox if you get a backfire.

Why do I know?

Bob B

Posted by: Mark Henry Aug 17 2019, 08:12 PM

QUOTE(mepstein @ Aug 17 2019, 09:44 PM)

Perry
@http://www.914world.com/bbs2/index.php?showuser=439

Perry can make you a quality plug and play adaptor harness.

You have to turn the airbox 180*, use a CIS pump and IIRC accumulator.
I'd use headers from MSDS or Ben's (mb911 ) heat exchangers and he also has an oil tank plus lines, tin is available from Restoration Design, Naro or maddog for a front mount. Rich for the cooler mod and throttle cable set-up, KEP for a flywheel and clutch.

Posted by: Mark Henry Aug 17 2019, 08:22 PM

Here's a thread on a 3.0 CIS conversion.

http://www.914world.com/bbs2/index.php?showtopic=282644