Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Is it or not?
Posted by: pascalou Oct 29 2019, 05:53 AM
Do you know if the AAV can be repaired ?
Posted by: BeatNavy Oct 29 2019, 06:13 AM
In what sense? It's got several components to it that probably have varying degrees of difficulty to repair, but sure, it can be repaired. Is the basic problem that it is sticking -- not opening or closing? You can try soaking it in PB Blaster (or something else) for a day or two. You can also carefully pry open the body of it to clean it from the inside. I did that once, and it was not too difficult.
I am assuming we are talking D-Jet AAV (or AAR). There's a good write up here about halfway down the page: https://members.rennlist.com/pbanders/DJetParts.htm
Posted by: dr914@autoatlanta.com Oct 29 2019, 09:01 AM
yes we do them all of the time, and install modern guts
Posted by: pascalou Oct 30 2019, 05:47 AM
yes we do them all of the time, and install modern guts
The problem is the solenoid that never become hot.
Thank you Beatnavy, George for your answers.
Posted by: dr914@autoatlanta.com Oct 30 2019, 09:47 AM
also we have many many customers in Belgium, because my wife Mia is from Menen Belgium
yes we do them all of the time, and install modern guts
The problem is the solenoid that never become hot.
Thank you Beatnavy, George for your answers.
Posted by: pascalou Oct 31 2019, 05:46 AM
also we have many many customers in Belgium, because my wife Mia is from Menen Belgium
yes we do them all of the time, and install modern guts
The problem is the solenoid that never become hot.
Thank you Beatnavy, George for your answers.
Yes i know Georges. I am a customer of yours and i already wrote to Mia for orders. Hurrah for Belgians !
Posted by: shane Oct 31 2019, 08:48 PM
AAV=Amphibious Assault Vehicle?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)