Does anyone know the correct hole sizes for the 4 clips that hold the lower horizontal chrome piece on that attach to the Sail Panel on each side? On my car they have been filled in over the years and even on the underneath/inside of the fender well its hard to tell their locations! I can guess based on the size of the clips but it would be nice to be sure. Thank you
should be 5mm holes, and if filled with only filler, you should be able to look sideways at the paint and see where they were and locate them with an awl
Thanks for the information, have a great day!
Excellent, thanks again appreciate the help. Looking great....
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)