I need a set of GT hood pins, clips, and hood plates, as well as a GT headlight kit. Quality reproduction is fine, doesn't have to be absolutely perfect "GT correct" just reasonably close and functional
you can make your own hood pin set. the pins are available at many fine auto parts stores, and I made the plates from 16g stainless steel, riveted to the trunk. Easy.
@http://www.914world.com/bbs2/index.php?showuser=2744
@http://www.914world.com/bbs2/index.php?showuser=3348
There you go. I just woke up your sources...
I got my rear holddowns from Pegasus Racing, the trunk button delete emblem is a 356 hubcap crest. I used Stoddard for that...
limited...but marek has the complte kit...
http://www.914world.com/bbs2/index.php?showtopic=308364&hl=
I have one GT headlight kit, I was getting ready to post. Platting on one release arm is a bit off
@http://www.914world.com/bbs2/index.php?showuser=2388 PM sent
have the Marek kit - never got around to using it
- $210 - usps priority mail, - you'll have in 3 days - or best offer, "PP-friends" only
.
other FS stuff - pdf : https://www.dropbox.com/s/dpeweido6zflkje/914%20911%20inventory%20all%20-%20july%202019.pdf?dl=0
@http://www.914world.com/bbs2/index.php?showuser=8436
@http://www.914world.com/bbs2/index.php?showuser=18672
the gt hood pin set has trapezoidal plates, the aftermarket round ones, which we always stock.
Mittelmotor makes the headlight release kits and hood pins in factory duplicate
We stock the mittlelmotor kits
We also have the white surrounds that are correct for the GT if you want the correct ones
https://900designs-container.zoeysite.com/914-gt-headlight-release-cable-kit-1
Attached image(s)
Thanks @http://www.914world.com/bbs2/index.php?showuser=2388 for the headlight cable kit. Now I just need to find some instructions
@http://www.914world.com/bbs2/index.php?showuser=439 More than welcome
Perry, with all your skills just make a set of hood pins. These are the one's I made. Best, Mark
200 euro = $220.5079 US - and 30 days ship - you want it in 3 days, make me an offer - per above
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)