Hi Guys..
I'm trying to remove my driver side seat and running into a little trouble. It's not a stock seat and the rails are a little different.
I tried going all the way forward, backing it off 1/2 inch or so like stock seats and feeling for a release but didn't. Perhaps my fingers are getting old..
If anyone has any suggestions - we'd take em!
I'll add pics from my phone.
-Ben
Pics. Took me awhile - had to save as Jpeg first.
Ben,
I had the seats out once before, but I can't remember exactly how I got them out, but much different from stock since they have two front bolts holding them down as well.
You may have to put the seat all the way back, undo the front bolts, then move the seat all the way forward to get the back bolts.
Hope this helps.
Dominic
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)