Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 914/6 Bosch Alternator

Posted by: PittsM12 Feb 3 2020, 09:35 AM

The replacement rebuilt sold is NOT an identical match. Connections different and about 10mm longer. Is there anyone that rebuilds the original alternator? my local shop said they could not.
Thanks!

Posted by: dr914@autoatlanta.com Feb 3 2020, 09:39 AM

You are right, and the new replacement is a hassle to install. You may search e bay or the internet for an al 21x. those are the old bosch rebuilds and will plop right in.

If you cannot find one, look for rebuilders in your area. Here we use our local guy and he does a great job

QUOTE(PittsM12 @ Feb 3 2020, 08:35 AM) *

The replacement rebuilt sold is NOT an identical match. Connections different and about 10mm longer. Is there anyone that rebuilds the original alternator? my local shop said they could not.
Thanks!


Posted by: mepstein Feb 3 2020, 10:10 AM

My local battery shop has rebuilt a couple dozen starters and alternators for the shop. Ask your mechanic where they send theirs out for repair.

Posted by: rgalla9146 Feb 3 2020, 10:42 AM

Find the oldest rebuilder in your area.
Why Porsche didn't just put a three wire plug on the outside of the fiberglass is a
mystery.

Posted by: mepstein Feb 3 2020, 11:05 AM

QUOTE(rgalla9146 @ Feb 3 2020, 11:42 AM) *

Find the oldest rebuilder in your area.
Why Porsche didn't just put a three wire plug on the outside of the fiberglass is a
mystery.

That would make things a lot easier.

Posted by: Mark Henry Feb 3 2020, 11:47 AM

IIRC last time I looked the bearings are hard to find and not cheap. I looked last fall because I think I have a rumble in the fan area.

Posted by: PittsM12 Feb 5 2020, 12:04 PM

Thanks for the input. I found a rebuilt one on ebay. I will report back re fit and quality.

Posted by: pete000 Feb 5 2020, 06:30 PM

Not cheap, but what about this ?


Attached thumbnail(s)
Attached Image

Posted by: Mikey914 Feb 5 2020, 11:08 PM

You can pay as much as you want. At that price I know I can make them!!! For less.


Hopefully I'm not needed and you can get a reasonable one.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)