Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ need engine harness pin out for 1988 911

Posted by: buck toenges Feb 26 2020, 09:53 AM

Does anybody have a good wiring diagram for a 3.2 engine harness from an '88 911? I need info on the engine 14 pin harness. color of wires and labeling of wires. I found this but want to see if there is anything else.

Thanks,
Buck Attached Image

Posted by: eric9144 Feb 26 2020, 10:06 AM

Diagrams are on Jeff Bowlsby's site:
http://bowlsby.net/914/WiringHarnesses/#ReferenceLibrary

He also does the adapter harnesses etc
@http://www.914world.com/bbs2/index.php?showuser=104

Posted by: mepstein Feb 26 2020, 11:59 AM

Does this help?

Attached thumbnail(s)

Posted by: JeffBowlsby Feb 26 2020, 12:03 PM

Perry Keihls your man for the /6 harnesses

Posted by: mepstein Feb 26 2020, 12:16 PM

He doesn't need a new harness, Just details on how to adapt the 3.2 DME into the 914.

Buck - 914Dave wrote me out some details in a notebook but I won't be back at my house until this weekend. I will send you a copy. Mark

Posted by: eric914 Feb 26 2020, 02:13 PM

Some good info from jim912928 post "Wiring up a 3.2l Motronic FI engine, my "how to" steps I used"

http://www.914world.com/bbs2/index.php?showtopic=116617&hl=wiring

Posted by: buck toenges Feb 26 2020, 02:41 PM

I found a pms conversion harness from a 3.2 to 914. I got too much stuff and I am not very organized. Just plugged it in and play. Better then microsoft windows!

Thanks
Guys