is this a correct size? also, what is the exact location?
Attached thumbnail(s)
Size looks to be about right.
In terms of dimensions mine's about 1 5/16" x 5 7/32" (34mm x 133mm)
In terms of mounting location...
I measured 3 locations:
Distance from the top of the door latch pin flange.
Distance from the weatherstrip seal pinch weld at the top of the sticker.
Distance from the weatherstrip seal pinch weld at the bottom of the sticker.
Unfortunately there's not that many great spots to get dimensions with a tape measure like the one I have on hand.
going to get my stickers set, here is a placement recommendation on AASE website. they sell all the stickers and get the door ones too with your infor in them but i think the charge 2x what Car-bone charged me and it didn’t take 4 weeks. From Poland i have i’d known less than a week.
so FYI for anyone that needs one of these they do the black and silver ones.
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)