Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ New GB Front trunk seal lip replacement metal 4' sections
Posted by: Mikey914 Mar 23 2020, 05:06 PM
So working with Cary on making a replacement metal that can be spliced in for the rusted channels that many of us have. Decided to do up a batch so that these are inexpensive for all. Cary has used these to repair my and Taylor's vehicles
You can cut out and drill spot welds to patch corners, or completely rebuild the entire trunk edge. If it's not too bad one strip should suffice, but they get cheaper if you get 2.
We will also basically give you one for the shipping if you buy a new front trunk seal. The metal ships in it's own tube so if you ship USPS it should be about $8.50.
I'm working with Cary to provide a little more of a tutorial on these, but now you can fix the rust!!!
Who's in?
Attached image(s)
Posted by: Mikey914 Mar 23 2020, 05:06 PM
more
Attached image(s)
Posted by: BPic Mar 23 2020, 05:11 PM
Wow! Wish these were around earlier. Nice work. Fabricating from stock steel is no fun!!
Posted by: BeatNavy Mar 23 2020, 05:15 PM
Excellent, I need this 
I'm good for at least 2, Mark.
Thanks to you and to Cary.
Posted by: bkrantz Mar 23 2020, 09:12 PM
I need at least 1.
Posted by: 914e Mar 23 2020, 10:40 PM
Great idea, I wish you had a a few months ago.
Posted by: jesse7flying Mar 24 2020, 06:38 AM
I'm in for at least two.
Posted by: bob164 Mar 24 2020, 12:54 PM
I will take two.
Posted by: jim_hoyland Mar 25 2020, 06:22 AM
FANTASTIC ! 
Posted by: relentless Mar 25 2020, 04:12 PM
I'm in for two.
Posted by: Mikey914 Apr 3 2020, 11:18 AM
Got these all done and will send PMs later today. Will keep the GB open til the 15th
THX all
Posted by: yellowporky Apr 3 2020, 12:14 PM
mee too please
Posted by: Mikey914 Apr 4 2020, 12:08 AM
Yes not too late.
By the way I can't send the codes out til Monday as I need to get these on the website I thought they were already.
Mark
Posted by: djway Apr 4 2020, 12:58 AM
me
Posted by: Mikey914 Apr 6 2020, 11:24 PM
PMs sent to all Thanks for your patience.
Mark
Just had to finish up on a few other goodies
Posted by: 71914-4 Apr 7 2020, 05:57 AM
I'll take two please.
Posted by: Mblizzard Apr 7 2020, 07:13 AM
I will take 2 as well!
Posted by: Luke M Apr 7 2020, 07:43 AM
Need at least 4 here.
Posted by: maf914 Apr 7 2020, 02:00 PM
Mark, please add me to the list.
Posted by: stevegm Apr 7 2020, 02:31 PM
I will take 5 or so.
Posted by: dakotaewing Apr 7 2020, 08:53 PM
I'll take 2 please - add me to the list as well -
Posted by: lierofox Apr 8 2020, 11:42 AM
Ooh. I'll go in for 2 of these!
Posted by: maf914 Apr 12 2020, 06:43 AM
Mark, The USPS shipping rate for two pieces in my cart is indicated to be $19.22. There is no apparent option for USPS $8.50 indicated in your GB offer. Could you check this please. Thank you.
Posted by: Mikey914 Apr 12 2020, 11:08 AM
hate to say it but sometimes the shipping calculator is wonky. The USPS rate to Florida for the package based on one set was $8.50, it will go by weight, I don't think that $19.22 will be correct. The way we typically handle this is refund the overcharge. When we charge actual as we do we can't hide the shipping calculator isn't spot on. We do not use shipping as a profit center as some do. But so far this is the only way we can do this.
mark
Posted by: Lg914 Apr 13 2020, 06:59 PM
I’ll take two
Posted by: Mikey914 Apr 15 2020, 08:57 AM
This closes today! Last call
Posted by: RobD615 Apr 24 2020, 04:40 PM
Bummer - I missed out. I just started restoring a 916-6 and would really like to have 4 if someone doesn't claim their order. Thank you. Rob Douglas
Posted by: Mikey914 Apr 24 2020, 05:58 PM
We have plenty in stock.
You can find them right here -
https://900designs-container.zoeysite.com/front-trunk-metal-for-porsche-914
You can still get a deal you just have to buy 2 sets. I will reset that end of the month.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)