Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Photos from a short drive with Clay and Betty!

Posted by: scottthephotog May 2 2020, 09:52 PM

Met up with Clay and Betty to get some footage and photos for the quaranTEENERfest video. Lots of fun, and amazing that Clay is doing as well as he is.

I had been using the 14mm f/2.8 for video work, and it was a bit strange shooting photos of the cars with it. I normally don't use such a wide angle for stills, but it resulted in some interesting shots.

Attached Image

Attached Image

Posted by: scottthephotog May 2 2020, 09:53 PM

Attached Image

Attached Image

Attached Image

Posted by: scottthephotog May 2 2020, 09:54 PM

Attached Image

Attached Image


Posted by: scottthephotog May 2 2020, 09:56 PM

Attached Image

Attached Image

Attached Image

Posted by: IronHillRestorations May 3 2020, 09:19 AM

Nice pics, really nice. The only thing wrong I see is 4.0?? Who puts a 4.0 in a 914?? biggrin.gif biggrin.gif

Posted by: 76-914 May 3 2020, 09:44 AM

Clay obviously has the "stretched" version. And the Blue one is about a foot shorter than Clay's? blink.gif

Posted by: scottthephotog May 3 2020, 11:54 AM

QUOTE(76-914 @ May 3 2020, 10:44 AM) *

Clay obviously has the "stretched" version. And the Blue one is about a foot shorter than Clay's? blink.gif


Haha. Yea. That's why I normally don't shoot automotive with a 14mm, but it's what I had on the camera for all of the video work.

Posted by: Mblizzard May 3 2020, 02:51 PM

QUOTE(IronHillRestorations @ May 3 2020, 07:19 AM) *

Nice pics, really nice. The only thing wrong I see is 4.0?? Who puts a 4.0 in a 914?? biggrin.gif biggrin.gif



You met Clay right? He is the Spinal Tap 11 but knows how to actually make it 11!

Posted by: ClayPerrine May 3 2020, 09:38 PM

QUOTE(Mblizzard @ May 3 2020, 03:51 PM) *

QUOTE(IronHillRestorations @ May 3 2020, 07:19 AM) *

Nice pics, really nice. The only thing wrong I see is 4.0?? Who puts a 4.0 in a 914?? biggrin.gif biggrin.gif



You met Clay right? He is the Spinal Tap 11 but knows how to actually make it 11!


Yes..it goes to 11. But like any (horsepower) junkie, I want more. Current HP is estimated at 430. Add a supercharger ($15K for an estimated 50% HP increase) and a Vonnen hybrid conversion (another 20 to 25% Hp bump, approximately). Then wheel motors for the front and a bigger battery pack than Vonnen uses. That makes an all wheel drive 914-6!

The Vonnen hybrid setup is 70K installed. They don't sell it as a kit. Too much liability when 480 volts comes into play.

That one would go to 20. biggrin.gif

But sadly that dream is not in the budget unless I win the powerball drawing. sad.gif

Posted by: Gatornapper May 4 2020, 05:50 AM

Double Ditto......

QUOTE(IronHillRestorations @ May 3 2020, 09:19 AM) *

Nice pics, really nice. The only thing wrong I see is 4.0?? Who puts a 4.0 in a 914?? biggrin.gif biggrin.gif


Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)