Anyone have a XR3000 and PS91 coil working?
I am looking for some wiring advice.
The XR3000 instructions don't talk about the PS-91 coil directly. The PS-91 doesn't have the post terminals like a standard coil.
DO I connect (crimp) the switched 12+ and the red wire together and then connect it to the (+) spade terminal?
Same for the (-) and the tach wire and the (-) spade terminal
Cheers
QUOTE (Kerrys914 @ Jul 8 2005, 01:16 PM) |
Anyone have a XR3000 and PS91 coil working? I am looking for some wiring advice. The XR3000 instructions don't talk about the PS-91 coil directly. The PS-91 doesn't have the post terminals like a standard coil. DO I connect (crimp) the switched 12+ and the red wire together and then connect it to the (+) spade terminal? Same for the (-) and the tach wire and the (-) spade terminal Cheers |
I'm also interested in this info, having just received this setup from Crane as a warranty replacement for my allison...
I do have the XR3000 and the PS-91 coil working on my SIX. I talked to a Crane tech and they said I woul dhave no issues and to make the plug gap .045".
FYI, I have not taken the engine on the road yet. I am tuning things on the ground, but it revs great.
Once I hit the road I'll update you guys
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)