The 2.7L big Type 4 had/had funky heads on it that were customized for the 6 stud case.
Can you do that with 1.8 or 2.0L 914 heads as well?
Anyone been there, done that, figured it out?
Thanks and hope Monday has been a good one.
Good morning and thanks for the response.
I was asking mainly to see if I could use 2.0L to get more stock exhaust. Basically making it less unicorn. Grin.
@http://www.914world.com/bbs2/index.php?showuser=21666
' date='May 19 2020, 05:01 AM' post='2816774']
Good morning and thanks for the response.
I was asking mainly to see if I could use 2.0L to get more stock exhaust. Basically making it less unicorn. Grin.
[/quote]
You can bolt any exhaust to any 914 head.
Hi Bruce - this engine has some sort of customized non-Type4 head.
Attached thumbnail(s)
That is the intake. What do the exhaust ports look like? If modified you probably cant adapt a stock type exhaust. And if you do it may restrict the breathing of the engine.
The heads that came with it have bigger valves than Tyep 4 heads, 40 and 48 which is pretty significant than even the upgraded 2.0L heads.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)