My favorite swap! Should be huge this year since Hershey was a bust.
See everyone there!
Attached thumbnail(s)
I haven't been able to attend Hershey the past few years but was planning on it this year then.. well we know what happened. I'll definitely attend this one!
it is on my calendar....and we are ready to go.
AND A CHANGE OF ADDRESS.
The management company for Ski Roundtop cancelled this swap meet due to Covid-19. Steve Limbert found another nice location only a few miles away, so the show is still on.
The new location is on the grounds of the Liberty Forge mini-golf course.
Address:
3921 Lisburn Rd, Mechanicsburg, PA 17055
There will be a 914 car show to celebrate the 50th anniversary of our beloved teeners, with peoples choice gifts for 1st and 2nd place.
Hope to see you there!
Bob
I'll plan on being there.
Zach
Me too!
I’ll be there! Really glad we can finally make one happen this year.
Bumping back up so east coast folks see this.
Question: Would it be wise to start a thread in the classifieds (or just in this thread - that might be the wrong location) for people to post up their parts needs? Maybe someone has something at home that they otherwise would not have brought to the swap.
Just an idea.
I currently need nothing unless you have a good 911 oil thermostat.
I do have a bunch of large 914 parts I can bring over, but need to know before hand.
Hoods
Decklids
Late style Rear Bumpers
Engine lid
Tinted Vent windows
914 Limited Edition Spoilers
then the parts get much smaller and more manageable to fit in a funnier car to drive.
Outside the scope of the swap, but if you have an Early Boxster, Cayman, or 993 I have BBS 10 spokes wheels, and new set of tires, that I will sell cheap. Tires are new Hanook Ventus V12 EVO2 still in Tire Rack wrapping.
And right afterwards will be offered a Cayman at an incredible deal. Just the way it works for me.
Maybe I need to take a new approach, I have these wonderful lite wheels, I need a Cayman to go with them.
If someone is interested in meeting up, I have these I could bring:
1) Wheels - 6x15 cookies: http://www.914world.com/bbs2/index.php?showtopic=347935&hl=
2) Front Trunk: http://www.914world.com/bbs2/index.php?showtopic=347934&hl=
If not, I'll just drive up in my 914 instead.
I am looking for an "early" cigarette lighter if someone has one...
I am looking for a 2 VDO inch oil pressure gauge.
I'm also looking for the piping parts for heat. I have 75/76 parts and backdated my exhaust and want to get the heat working.
Zach
Dave, I might have the early cig lighter, I will check.
If you don't I think I have one also oil pressure gauge that is...
Since I asked,
I am looking for:
-REAR trunk hinges and the accouterments they come with, in working condition.
-Some Coco mats if anyone has a set laying around.
-Maybe a cheapo 14" fuchs wheel for a full size spare.
@http://www.914world.com/bbs2/index.php?showuser=23209 - when you say everything are you talking pivot bolts, small arm bracket , big arm bracket and the associated large arm? I have a set of the arms sitting on the bench to bring over will need to locate the other bits.
I am thinking #2, 32, 33, 34, 35, 36
25 is better replaced, but I will have them in plastic, they just deform a bit over time.
@http://www.914world.com/bbs2/index.php?showuser=2388 correct. I can get away with just the arms I believe, and replace the necessary pieces. One of my arms is bent, and the other broke off..... thanks to the PO towing backwards.
As long as requests are being posted, I'm looking for a bare decklid for a 993. Message me if you can bring one, I'll be there with my 914-6.
Steve
I have two free spots for this event that i won at the NE Stroudsburg event this summer. Something came up and I will not be going and selling anything like i planed. PM me if you are planning on selling anything, you can have this ticket. i am heading to Richmond VA right now so I can meet on the way there or back tomorrow.
https://mail.google.com/mail/u/0?ui=2&ik=8acbe4f658&attid=0.1&permmsgid=msg-f:1678027173946544664&th=17498cd2fa895218&view=att&disp=safe
Anyone have a drivers quality set of $16” phone dials or D90s?
@http://www.914world.com/bbs2/index.php?showuser=1435
' date='Sep 17 2020, 04:49 AM' post='2852031']
[quote name='mepstein' post='2851875' date='Sep 16 2020, 06:00 PM']
[quote name='VaccaRabite' post='2850296' date='Sep 11 2020, 10:14 AM']
I am looking for a 2 VDO inch oil pressure gauge.
I'm also looking for the piping parts for heat. I have 75/76 parts and backdated my exhaust and want to get the heat working.
Zach
[/quote]
Zach - I think I have most of the heat parts. They aren't in a box all ready to go but I should be able to dig them up. Let me know. No charge...mark
[/quote]
Yes please. Functional heat has been a goal for a while.
Zach
[/quote]
I have many VDO 52mm oil.pressure gauges. Do you want the 0-5 bar or 0-10 bar range.
They are from 924's, 944's or VW GTI Rabbits.
@http://www.914world.com/bbs2/index.php?showuser=1435 I think i have what you need.
I have one i pulled out of my car and i think it goes to 80psi. I'll bring it up
Was a good time today. Great weather and a pretty good turnout. 12 914s, a hand full of 911s, and a few water pumpers parked outside the "featured" area. Including a sweet Rabbit GTI, and a 924 Turbo.
Zach
Was great catching up my fellow 914 peeps.
Had the pleasure of meeting Stephen (914forme) in person.
Thanks for the deal on the lenses Stephen! Outstanding weather.
A very cool in period modified 914 from Stoddard showed up.
2.6L 6 cylinder. Nicely massaged flares.
Attached thumbnail(s)
@http://www.914world.com/bbs2/index.php?showuser=2388 - it was nice meeting you even though I didn't realize who you were until I got home.
It was my first time and surely not the last. Hopefully next year I'll bring the -6 conversion instead of the 911.
Thanks @http://www.914world.com/bbs2/index.php?showuser=10428 for helping out and for informing us of this event.
Gave me a chance to finally meet some other world members in person @http://www.914world.com/bbs2/index.php?showuser=23209 , @http://www.914world.com/bbs2/index.php?showuser=11329 and @http://www.914world.com/bbs2/index.php?showuser=1435
It was great weather. I was also the lucky winner of some PMB perfection calipers.
Great day for a drive. Put on about 250 miles (roundtrip) in the 914. Met some folks but struggled with names/faces with the masks and all. Sold some wheels. Couldn't find the cigarette lighter I wanted. Only snapped a pic or two.. Mine's the white one.
Charlie, I have no idea. It’s on its 4th owner.
Originally purchased and modded by Stoddard. Their chief body shop man did the
hammer and dolly on the flares. Battery moved up front as well as fuel pump
Electric antenna in engine bay. Some custom basket weave covered center cushion.
Attached thumbnail(s)
It previoudly had a renegade sport seat prior to these pics. The owner was selling just the one for $400. I almost pulled the trigger as it was pretty nice.
A huge thanks to Steve Limbert at Aircooled Racing for making this event happen.
Thanks to PMB and 914Rubber for their generous donations and continued support of the 914 community.
I had a great time getting caught up with "the regulars" and it was nice to meet some new faces as well.
Sticking with tradition, I managed to get sunburned.
Here are the prize winners:
Peoples choice - 914's only:
PMB Calipers:
914 Rubber Prizes:
More pics:
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)