Posted by: brant May 23 2020, 08:54 AM
I'm trying to reassemble the induction on a race motor with carbs
went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash....
unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks
So the heads have been worked, and the Intake Port is 35mm
looking through different years of factory ports... I see the early S cars are 36mm
but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly....
does anyone know where they could have come from?
I'd like to buy 35mm Intake gaskets
looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up
can anyone help guide me?
thanks in advance
brant
Posted by: Krieger May 23 2020, 09:20 AM
If anyone has it it would be Engine Builders Supply in Reno.
Posted by: Luke M May 23 2020, 09:29 AM
QUOTE(brant @ May 23 2020, 07:54 AM)
I'm trying to reassemble the induction on a race motor with carbs
went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash....
unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks
So the heads have been worked, and the Intake Port is 35mm
looking through different years of factory ports... I see the early S cars are 36mm
but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly....
does anyone know where they could have come from?
I'd like to buy 35mm Intake gaskets
looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up
can anyone help guide me?
thanks in advance
brant
Hi Brant,
Post a pic of the gasket. I'll take a look and see if I have any spares here.
Posted by: Krieger May 23 2020, 09:33 AM
Other strong possibilities: PMO, Paul Abbott are carburetor kings.
Posted by: brant May 23 2020, 10:50 AM
QUOTE(Luke M @ May 23 2020, 09:29 AM)
QUOTE(brant @ May 23 2020, 07:54 AM)
I'm trying to reassemble the induction on a race motor with carbs
went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash....
unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks
So the heads have been worked, and the Intake Port is 35mm
looking through different years of factory ports... I see the early S cars are 36mm
but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly....
does anyone know where they could have come from?
I'd like to buy 35mm Intake gaskets
looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up
can anyone help guide me?
thanks in advance
brant
Hi Brant,
Post a pic of the gasket. I'll take a look and see if I have any spares here.
I can
a super nice offer
but I want to buy spares too... so hoping to find the source so I can buy 24 of them.
super nice offer sir!
I'll start calling around
thanks guys
brant
brant