can the rear view mirror be taken apart to swap the glass and tilt mechanism?
I have 2 that arent great that could be used to make one good one
thanks
Mirror part is pressed to fit. Base and mounting pieces can be changed.
AFAIK if the orbital ball is loose or the day/night lever is broken the mirror is toast.
Do you have a remedy Mark ?
No other fixes that I know of.
@http://www.914world.com/bbs2/index.php?showuser=23161
You can pop out he glass carefully to access the nut inside of the mirror housing. A glass shop can make a new mirror. they need some clearance aronud the mirror. I had one made and the glass broke before installed because the mirror fit was too tight. The mirror glass retainer or backing is usually shot causing the mirror to rattle. A gob of silicone rubber behind the mirror will secure it.
thanks chaps
Ill figure out what out do now i know what the options are
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)