Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Seat Belt Interrupt / Interlock question

Posted by: RiqueMar May 24 2020, 06:35 PM

I've searched, but have only come up with results similar.... Question for guys with later cars / harnesses; Is there any reason I need to keep the interlock system located under the passenger seat?

I know I can engage the starter by linking the Yellow and Yellow and Red wires, but I'm concerned that some items won't activate, as I see some leads are the same colors. Is it possible for me to solder leads together and completely remove the equipment?

The harness is a 75', however the car is a 70' 2.6 conversion. First photo shows the system when pulled, however based on the look of a lot of the connections, I'm thinking of 'deleting' it completely.

Attached Image

Posted by: JeffBowlsby May 24 2020, 11:15 PM

Don't even think about removing it. Just connect the big yellow and yellow-red together and be done with it. Study the schematic and you will quickly see why this should not be removed.

Posted by: RiqueMar May 25 2020, 10:20 AM

QUOTE(JeffBowlsby @ May 24 2020, 10:15 PM)

Don't even think about removing it. Just connect the big yellow and yellow-red together and be done with it. Study the schematic and you will quickly see why this should not be removed.

Hi Jeff, thanks. For my own knowledge, is this the case even with a conversion?

Posted by: JeffBowlsby May 25 2020, 02:35 PM

Yes.