Printable Version of Topic

Posted by: Maroon Loon Jun 2 2020, 04:16 PM

Hello,

I am looking to replace signal relay # 914.618.303.11.

Is there a place to purchase another one?

I came across a URO model with is listed as a replacement version, although the pins are located differently.

What do you think is the correct positioning / location pins from the OEM part to the URO?

See photos

Many Thanks,

Posted by: Spoke Jun 2 2020, 06:14 PM

I believe the top relay pin layout is for the hi/lo beam selector relay.

The lower relay pin layout is for the flasher relay. Universally available EP26 in many FLAPS is LED-compatible and pin compatible with the 914 OEM relay. A slight modification is needed for the K/C/C2 pin to drive the common connection of the tachometer turnsignal indicators. I resell modified EP26 flasher relays for the 914.

Posted by: second wind Jun 2 2020, 06:55 PM

QUOTE(Spoke @ Jun 2 2020, 05:14 PM)

I believe the top relay pin layout is for the hi/lo beam selector relay.

The lower relay pin layout is for the flasher relay. Universally available EP26 in many FLAPS is LED-compatible and pin compatible with the 914 OEM relay. A slight modification is needed for the K/C/C2 pin to drive the common connection of the tachometer turnsignal indicators. I resell modified EP26 flasher relays for the 914.

Posted by: Spoke Jun 2 2020, 07:06 PM

QUOTE(second wind @ Jun 2 2020, 08:55 PM)

QUOTE(Spoke @ Jun 2 2020, 05:14 PM)

I believe the top relay pin layout is for the hi/lo beam selector relay.

The lower relay pin layout is for the flasher relay. Universally available EP26 in many FLAPS is LED-compatible and pin compatible with the 914 OEM relay. A slight modification is needed for the K/C/C2 pin to drive the common connection of the tachometer turnsignal indicators. I resell modified EP26 flasher relays for the 914.

Hello Spoke...so now I see that you do sell the modified turn signal relays for 914's....I must have missed it earlier. Could you please post the link for the purchase of such a relay? Thank you very much.
gg