Posted by: Speedy_Boi Jun 5 2020, 08:48 PM
I have a Old 914-4 and Its been in the garage for 30 years and its sagging, What Parts do I need to fix the sagging problem.
Posted by: Krieger Jun 5 2020, 08:53 PM
Sagging where? At the door jambs? Rear suspension? Post a couple of pics.
And...
Posted by: Speedy_Boi Jun 5 2020, 08:54 PM
QUOTE(Krieger @ Jun 5 2020, 08:53 PM)
Sagging where? At the door jambs? Rear suspension? Post a couple of pics.
And...
at the door jams
Posted by: bdstone914 Jun 5 2020, 09:41 PM
QUOTE(Speedy_Boi @ Jun 5 2020, 07:54 PM)
QUOTE(Krieger @ Jun 5 2020, 08:53 PM)
Sagging where? At the door jambs? Rear suspension? Post a couple of pics.
And...
at the door jams
Typically caused by rust weakening the main structuals. Requires getting the car square and welding new sections where needed.
Posted by: SO.O.C914er Jun 5 2020, 09:42 PM
Interesting show some pictures please.
Posted by: Cairo94507 Jun 6 2020, 07:02 AM
@http://www.914world.com/bbs2/index.php?showuser=24352 Welcome. You should start be telling us the story of the car and then post a lot of pictures of the car so people can best advise a course of action.
Posted by: Tdskip Jun 6 2020, 07:45 AM
Welcome @http://www.914world.com/bbs2/index.php?showuser=24352 - as notes get lots of pictures posted here before doing anything else.
Hate to say it, but the news may not be good.
Posted by: Speedy_Boi Jun 6 2020, 08:37 AM
QUOTE(barefoot @ Jun 6 2020, 06:34 AM)
Not this bad i hope ?
no its still in good shape, its just low down on the ground
Posted by: JamesM Jun 6 2020, 12:08 PM
QUOTE(Speedy_Boi @ Jun 6 2020, 06:37 AM)
no its still in good shape, its just low down on the ground
Put air in the tires!
Posted by: Speedy_Boi Jun 6 2020, 08:34 PM
QUOTE(bdstone914 @ Jun 5 2020, 09:41 PM)
QUOTE(Speedy_Boi @ Jun 5 2020, 07:54 PM)
QUOTE(Krieger @ Jun 5 2020, 08:53 PM)
Sagging where? At the door jambs? Rear suspension? Post a couple of pics.
And...
at the door jams
Typically caused by rust weakening the main structuals. Requires getting the car square and welding new sections where needed.
how do I get the car Square exactly, its been awhile since I did anything with it or on it
Posted by: Nojoah Jun 6 2020, 09:14 PM
QUOTE(Speedy_Boi @ Jun 6 2020, 10:34 PM)
how do I get the car Square exactly, its been awhile since I did anything with it or on it
Measure, measure again, measure some more...
As many others have said, if you want some actual help, pictures are a
must!
Posted by: bkrantz Jun 6 2020, 09:21 PM
Parts? Get a few boxes of hundred dollar bills to start.