Printable Version of Topic

Posted by: 914Sixer Jun 6 2020, 08:55 PM

Part number 901 301 311 2R. Number does not exist in current PET for 911/912/914 transmission side cover. All models show to use the 914 cover part number 914 301 311 01. Trying to solve a question. Seller says part is from a 69 912 902 trans case.

Cover has a clutch cable loop to hold up cable. Thinking someone might fab a bracket to hold clutch cable in close .


Attached image(s)

Posted by: bdstone914 Jun 6 2020, 09:08 PM

@http://www.914world.com/bbs2/index.php?showuser=3457
The number you posted is a casting number. It does look like an early 901 side cover. PET show it for 911/912 and 914. They probably kept the same part number and dropped the tab in later years. Looks like it would interfere with the clutch cable pulley bracket mounting on a 914.


Attached thumbnail(s)

Posted by: jcd914 Jun 6 2020, 10:55 PM

Maybe a 71 or 72 911 trans with the pull clutch.

Jim

Posted by: sixnotfour Jun 6 2020, 11:45 PM

70-71 rare ..not worn out..911S Registry.. what is the numbers on the the bottom side rib ??

Posted by: rgalla9146 Jun 7 2020, 05:57 AM

BINGO !
'70-'71 first version of the pull clutch. The trans is known by it's 911 prefix.
Very unusual TOB too. When mounting the trans to the engine the TOB had to be
rotated to attach it to the throwout arm. Stumps many a mechanic.
Two year only clutch cable too.
The loop on the side cover is a guide for the cable not a mount.

Posted by: Mark Henry Jun 7 2020, 06:17 AM

I had to cut that off when I was installing a 911 (901) trans into my bug. It interfered with the bug eng/trans frame horn.
My bug shifts as bad as a 914.

Posted by: Al Meredith Jun 7 2020, 03:26 PM

I have one of these covers if anyone needs or wants one let me know . AL

Posted by: gms Jun 8 2020, 07:32 PM

all my 1970 914/6s have this type of cover and I have found some 1970 914/4s with them.

Posted by: 914Sixer Jun 8 2020, 07:49 PM

Thank you Glenn. I knew I was not an old guy going South.

Posted by: Krieger Jun 8 2020, 08:58 PM