Hi All,
Does anyone have any reference on the wiring colors and functions for the 914/6 harness? Currently, this is what we have come up with.
Working on reinserting into 12-pin connector and then, soldering on the female connectors to the new harness.
here is a recent thread all about it
http://www.914world.com/bbs2/index.php?showtopic=345469&hl=
Not sure exactly what you are looking for but here are some pix of the steering column switch diagram. The one diagram shows the terminal numbers. It is not at all clear but it might get help. The others show the wire colors.
Let me know if you need any others
Attached thumbnail(s)
Thanks all.
@http://www.914world.com/bbs2/index.php?showuser=2744 - For clarification, I did see the thread listed but it seemed to me this was based on adapting a 911 steering. Am I correct?
The reference diagrams help, however what I'm looking for is wire color and function. I have a /6 column, I just want to confirm that my notes are correct.
@http://www.914world.com/bbs2/index.php?showuser=1785 / @http://www.914world.com/bbs2/index.php?showuser=15674 - from your diagrams (I can't seem to get my hands on one) can you discern which color responds to which function / equipment?
Very appreciative if you can, thanks in advance. This would a lot!
Are you looking for each of these pins to be identified?
914/6 turn signal switch 12 pin
I can trace wires to their termination on my diagrams but it will take some time. Maybe late tonight.
EnRique, better yet send me your email.
enrique, emails sent Good luck
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)