Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Engine side heating ducting & pipe work

Posted by: dt4 Jun 20 2020, 08:12 AM

I am missing parts based upon trying to figure out what goes where
My manual isn’t really clear on what I am missing and I couldn’t figure out what I am trying to put where
Is there a clear diagram available showing the position of the parts from the under side and / or could you explain or show me what I am missing please
Thanks
David

Posted by: 76-914 Jun 20 2020, 08:18 AM

https://www.porsche.com/usa/accessoriesandservices/classic/genuineparts/originalpartscatalogue/

Posted by: rhodyguy Jun 20 2020, 09:36 AM

First, verify which type of heat exchangers are on your car. The 2 'J' tubes in the picture are for 75-76 heat exchangers.

Posted by: barefoot Jun 20 2020, 12:34 PM

Look in here, you'll have to wade down thru till you find the exhaust system diagrams & P/N's: Go to illustration 202-15 for both 70-74 & 75-76 systems.

petE.pdf ( 3.58mb ) Number of downloads: 84

Posted by: dt4 Jun 20 2020, 01:01 PM

my heat exchangers have a round and an oblong exit
Its a 1.8 75 car

I will google for images, I cant make head or tail of the manual and lifes too short to figure out how to navigate the Porsche site

Posted by: dt4 Jun 20 2020, 01:18 PM

Attached Image
If its this set up that I need to put together I am missing a fair few parts

Posted by: dt4 Jun 20 2020, 01:30 PM

I think this is the set up i am needing to put together
Attached Image