Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Spline Lining

Posted by: forrestkhaag Jul 2 2020, 01:24 PM

Can anyone let me know if there is specific hub set for the rear of an original 914-6 (verses 911) and/or how do I clearly represent what was sold to me as "914-6 rear hubs"
as just that at the point of listing herein?

The number 901 33J ... ... is on both hubs Also, any estimate of value for the pair?Thanks to all. beerchug.gif


Attached thumbnail(s)
Attached Image Attached Image

Posted by: aturboman Jul 2 2020, 01:51 PM

The rear hubs are the same as 911 and are a 901 part number in the parts book.

The stub axles however that go into the hubs are 914-6 specific (only) and are quite hard to come by.

Hope this helps


Posted by: forrestkhaag Jul 2 2020, 02:04 PM

QUOTE(aturboman @ Jul 2 2020, 12:51 PM) *

The rear hubs are the same as 911 and are a 901 part number in the parts book.

The stub axles however that go into the hubs are 914-6 specific (only) and are quite hard to come by.

Hope this helps


yes it does / thanks beerchug.gif

Posted by: 914Sixer Jul 2 2020, 04:51 PM

69 on 911 stub axles will fit with the larger 100mm or 110mm CV joint

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)