"Throw a bug engine in there, it will be way cheaper, or find a bus motor, its the same thing."
I guess I should've known I'd get some answers like this, but at least I got a responce
I posted this request with the thought that there might be someone out there with an engine laying around, in the way, that they'd like to get outta their garage.
I dunno, guess I'm grasping at straws
.........b
We'll start with:
1. What do you need?
2. What can you use?
3. What do you want?
Ha ha.. I just received this the other day and thought I would share it.
B
classic!
I purposely posted his email address so we could all show him how much we dont suck..LOL
Bruce,
Watcha trying to do ?
B
I've got a 1.8 without FI if you're interested.
Bruce I still have another 2.0 at CAMP.
Let em know if interested.
CCLINCAMPERATLARGE
Buy one, get two free!
Don't bother with 'valve adjustments', at this price just tear it out and throw a new one in!
[should have never looked at TypeI parts, even as a joke....just re-realized how bad we get screwed on TypeIV parts. ]
Attached image(s)
Damn Miles--they really DO hate horses....fucking weird shit man--
you can get a V8 engine cheap.... the conversion might bend you over though...
In answer to all the questions like;
What do I want, need, can use, want to do...
if it's free (another straw grasp)
if it's cheap $300 or less (Can't even afford that)
can use anything cept the vw (I guess)
I'd just like to get it on the road, drive it... I'm afraid if I let it set too much longer I'll fergit how it all goes back together not really but...
Went into the shop yesterday & looked at all the parts laying on the floor & thought, "geeze, will I ever see this stuff where it belongs again (soon)?
I'll call Craig & see what he's got up his sleeve & Kevin (rhodyguy) just said Jon was parting a car with a 2.0 so we'll see what happens.
thanks for the well wishes guys. Yer always there for us.
..........b
Doesn't Kevin have a 2056 sitting there?
gonna keep rubbing it in aren't cha you wannabe? go build YOUR motor or something.
k
Hey, I worked on the Westy all day Sunday and stopped the terminal oil leaks!
And the sensors for the oil pressure and temp gauges and the CHT gauge.
Wow, this thing gets up to 350 Degrees when ya push it quickly!! Oil hits 220 degrees on the freeway at 70 mph, 185-190 at 65!
Blair comes back next week so we will put the 914 back together then.
How is the BBQ coming?? I guess I'll have to just drive down as I want to see the mystery motor.......
sent ya a pm. all those low wages you paid blair will come back to haunt you now! . "sure dad, $60 an hour".
k
A later VW bus Type IV engien would fit. Depends on how cheap you want the motor. Do you need a complete motor, with cooling, FI, etc... or just a long block?
Hey Bruce
If you are still in need in a month I can let you run the engine that's in my car now.
I have to finish Jake's kit first but, when I'm done the old one will just be sitting. Runs good but valve guides are toast. I don't want to sell it but you can borrow it to get Punkin on the road again for fall.
Dave
I have a good 1.8* with no heads.....$100 plus shipping
*new pushrod seals, bottom end has approx. 10K miles on it
QUOTE |
dmenche914 Posted on Jul 12 2005, 12:07 PM -------------------------------------------------------------------------------- A later VW bus Type IV engien would fit. Depends on how cheap you want the motor. Do you need a complete motor, with cooling, FI, etc... or just a long block? |
QUOTE |
DNHunt Posted on Jul 12 2005, 12:54 PM -------------------------------------------------------------------------------- Hey Bruce If you are still in need in a month I can let you run the engine that's in my car now. I have to finish Jake's kit first but, when I'm done the old one will just be sitting. Runs good but valve guides are toast. I don't want to sell it but you can borrow it to get Punkin on the road again for fall. Dave |
QUOTE |
Mueller Posted on Jul 12 2005, 12:59 PM -------------------------------------------------------------------------------- I have a good 1.8* with no heads.....$100 plus shipping *new pushrod seals, bottom end has approx. 10K miles on it |
I have a free 1.8 still. Just like I mentioned above. No FI, but everything else is yours.
QUOTE |
Thanks Mike, would 2.0 heads work on that? Prolly not, eh? Then there'd be the search for FI cuz 1.7 or 2.0 wouldn't fit either |
QUOTE (McMark @ Jul 12 2005, 02:13 PM) |
I have a free 1.8 still. Just like I mentioned above. No FI, but everything else is yours. |
Lower the fuel pressure on the 2.0 FI and it should work well enough. I'm happy to get rid of another "lawn ornament".
QUOTE (Mueller @ Jul 12 2005, 02:17 PM) |
actually, the 1.8 motor currently has very nice fresh 2.0 heads on it (about 50 miles on the rebuild of the heads) |
ah oh! see what I started!
Mark, does it (did it) run good? This is getting tempting
Mike, is that $100 price with the heads?
Shit, yer both in (basically) the same area... may as well get both right? 10 hour drive & Kevin needs a hood from Jon......
I never heard it run. I would expect it to run fine. Not forever, but a good stop-gap. It turns over fine, so there's no issues there. If I get motivated I'll hook a trans & starter up and check the compression.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)