914World.com [Powered by Invision Power Board]

Posted by: bbrock Aug 10 2020, 07:00 PM

Like the topic says, I'm prepping my rocker covers for paint and thinking SEM Chip Guard might be a good choice. I've become a big fan of SEM products and have a quart of trim black for the bumpers, but thought the chip guard might add a little protection while better matching the heavy, imperfect factory finish.

Anyone used it or have thoughts?

Posted by: FlacaProductions Aug 10 2020, 07:18 PM

Hey Brent - this post from @http://www.914world.com/bbs2/index.php?showuser=2108 caught my eye a couple of days ago - maybe something to think about:

http://www.914world.com/bbs2/index.php?s=&showtopic=159774&view=findpost&p=2841289

Posted by: bbrock Aug 10 2020, 07:24 PM

QUOTE(FlacaProductions @ Aug 10 2020, 07:18 PM)

Hey Brent - this post from @http://www.914world.com/bbs2/index.php?showuser=2108 caught my eye a couple of days ago - maybe something to think about:

http://www.914world.com/bbs2/index.php?s=&showtopic=159774&view=findpost&p=2841289

Thanks Brian, I saw that too and thought it was a good idea, but not quite the OE finish I'm looking for on this build.

Posted by: johnlush Aug 10 2020, 08:09 PM

I've not used the SEM product but suspect it's close to whatever the factory stuff was (Wurth?). I have used 3M Rocker Schutz. Pretty easy to customize depending on what you're looking for by altering the viscosity, air pressure and spray pattern. Now that I think about it, I'm not even sure what the stock finish was because everything I've touched has been redone at least once. But given your proclivity for perfection I'm sure you'll sleuth it out!

Posted by: jack20 Aug 10 2020, 11:00 PM

I used it and was very pleased. Matched original finish very well.

Posted by: bbrock Aug 11 2020, 09:40 PM

Awesome! Thanks for the feedback.

Printable Version of Topic