Good evening,
If anyone has any leads where I can purchase this connector and pins for the IAT sensor, looks like the same for injector as well. If you can let me know it would be appreciated.
Thank you
Ted
Jeff Bowlsby would know.
NAPA NW 725165
Try DigiKey.com
Part number 63241-3 @ 15 cents each
https://www.napaonline.com/en/p/CRB217421
Yes, they worked for me. Those connectors are used throughout the fuel injection wiring harness. You need a special tool or a very small flat bladed screwdriver to release the connector from the plastic covers.
Thank you everyone for your helpful information.
https://www.djetparts.com/porsche-1?lang=en
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)