Any tips on how to replace the filler neck gasket? Do I need to drain the tank? Is there an easy way to drain it?. Does anyone know the torque specs for the bolts? Any help would be appreciated.
I did it a couple years ago. I just unbolted the filler neck, cleaned off the mating surfaces and then bolted it back on. I made the nuts snug but didn't crank on them. Tightened them with a star pattern. I also changed the gasket on the filler cap and the sending unit.Doing those, new evap hoses and new fuel lines got rid of the gas smell.
So I don't have to drain the tank?
Cool. Thanks Mepstein.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)