Printable Version of Topic

Posted by: Robson51 Sep 24 2020, 01:07 PM

I'm sure a bunch of you clever guys out there have made a tool to remove the CHT sensor with the wire intact.

Rather than reinvent the wheel and waste a bunch of time, can anyone give me a picture or description of what they have done? Motor is still in the car.

TIA

Posted by: Frankvw Sep 24 2020, 01:17 PM

http://www.914world.com/bbs2/index.php?showtopic=116303
that is the idea...a deep socket....

Posted by: Krieger Sep 24 2020, 01:52 PM

Buy a cheap deep socket then hold it on your grinder.

Posted by: Phoenix914 Sep 24 2020, 07:57 PM

I just slide a socket down over the wire and then use a large, flat head screwdriver to turn the socket. Works like a charm.

Posted by: Root_Werks Sep 25 2020, 06:09 PM

I use a very deep socket and curl/fold the wire into the socket. Works great.

Posted by: bdstone914 Sep 26 2020, 09:16 AM

This style tube wrench is what i use


Attached thumbnail(s)