Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Oil cooler size

Posted by: simonjb Oct 10 2020, 08:30 PM

Hi

I am rebuilding my 1974 2.0 and am having trouble attaching the Two part bracket
that goes around the end of the engine oil cooler. The bracket is too small to fit around it. Would be great is someone could measure the Width sides of a cooler - perhaps I have the wrong one ?

Thanks

Posted by: Robarabian Oct 10 2020, 10:13 PM

Is it an aftermarket "new cooler"... if so, they are slightly different dimensionally. You will need to trim or slightly form the new cooler so the bracket fits.

Posted by: simonjb Oct 11 2020, 05:31 PM

QUOTE(Robarabian @ Oct 10 2020, 10:13 PM)

Is it an aftermarket "new cooler"... if so, they are slightly different dimensionally. You will need to trim or slightly form the new cooler so the bracket fits.

\

Thanks....Thats exactly what happened....I managed to modify the cooler to fit.