Printable Version of Topic

Posted by: burlybryan Oct 15 2020, 08:01 AM

Gearing up to replace the rear floor pan and wondered if people have a preference on vendor options. RD is the standard, but I thought I read that some have mentioned better fitment with the AA version.

thanks.

Posted by: Superhawk996 Oct 15 2020, 05:01 PM

RD always has nice parts. I'm using 1/2 tin that is split right side vs. left side from AA and have no issues with it. Not welded in yet but have done a couple mock up fittings and haven't noticed any issues.

Posted by: barefoot Oct 15 2020, 05:45 PM

I got the AA panel several years ago and used just the rear most portion as didn't need any more, it fit fine.

I also cut out the standoff's for the muffler heat shield from the old panel and used SS pop rivets to attach them to the new part.

Posted by: bbrock Oct 15 2020, 06:32 PM

I installed the full RD floor pan. It fit great.

Posted by: burlybryan Oct 15 2020, 07:38 PM

Appreciated info. Thanks.