Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ OT: Anyone in Richmond Dist. of SF, CA that can..

Posted by: neo914-6 Jul 15 2005, 01:15 AM

No frame so it can roll up. I can pick it up from you in a week or two...

I am screwy.gif http://www.914world.com/bbs2/index.php?act=ST&f=2&t=34939

Posted by: Dave_Darling Jul 15 2005, 10:59 AM

Well, I'm not doing much these days... Is it available during the day? My evenings are somewhat full. My condo is right by the McD's where we sometimes have the breakfast meetings, so you can get it sooner than next week.

LMK. Email, please.

--DD

Posted by: ChrisReale Jul 15 2005, 11:32 AM

I can pick it up if you need to. 415-225-3594. I work until 5pm, let me know if I can help.

Posted by: Andyrew Jul 15 2005, 11:35 AM

So.... What are you going to do with a soft top? ohmy.gif

Posted by: neo914-6 Jul 15 2005, 11:55 AM

Andrew,

The designer in me is always exploring ideas. I have a 914 frame and no top. I just want to see what I can adapt from this top, maybe nothing because of the shape and size. I also want to replicate the Elise soft top so it's all research and ideas for now...

How's the fenders, I just got the HID's so I'll need to test fit them at some point...

Chris,

If you are closer than Dave then I'll give you a call. He says his condo is near McD's which I have no idea which one that is... confused24.gif

Posted by: Jenny Jul 15 2005, 12:29 PM

QUOTE (Neo914 @ Jul 15 2005, 10:55 AM)
If you are closer than Dave then I'll give you a call. He says his condo is near McD's which I have no idea which one that is... confused24.gif

I think DD is offering to drive up and pick it up for you. And his condo is close to McD's in San Jose "where we sometimes have the club breakfasts" by 280/Meridian, so you should be able to pick it up from him sooner than the 2wks you previously stated. Since San Jose is closer than San Francisco for you.

Jen

Posted by: neo914-6 Jul 15 2005, 01:02 PM

QUOTE (Jenny @ Jul 15 2005, 10:29 AM)
QUOTE (Neo914 @ Jul 15 2005, 10:55 AM)
If you are closer than Dave then I'll give you a call.  He says his condo is near McD's which I have no idea which one that is... confused24.gif

I think DD is offering to drive up and pick it up for you. And his condo is close to McD's in San Jose "where we sometimes have the club breakfasts" by 280/Meridian, so you should be able to pick it up from him sooner than the 2wks you previously stated. Since San Jose is closer than San Francisco for you.

Jen

Yep he clarified that in an email. We are practically neighbors and he frequently visits his "attorney" on the pennisula. Dave is the man. smilie_pokal.gif Thanks all!

Posted by: Andyrew Jul 15 2005, 02:11 PM

The fenders suck... I havent had time in the past week to get any work on them (prepping my car for the autox tomorrow. scca)

Im really debating giving you MY fenders. I am having serious problems with the fenders warping to much. Like the bottom of the fenders, one side is caving in, one side is caving out. I welded a bar connecting the two so no more caving. but the bottom of the flares will not flare out, which sucks for your design because your rear flares flare out and suck the whole wheel under.

I can make my fenders work, remove all the bondo from the drivers side, and finish it properly... Then finish the passanger side properly...

Email me your idea's.

Sorry for the bad news. I am going to get this done for you.

Posted by: Dave_Darling Jul 15 2005, 02:17 PM

I left a voice-mail; no reply from the guy yet. I will be running out of time to get it in about 30 minutes (my attorney has scheduled something for this afternoon). So possibly over the weekend, or during the day next week some time.

--DD

Posted by: neo914-6 Jul 15 2005, 05:04 PM

No problem , I guess not everyone is online as frequently as some of us. biggrin.gif

Anytime that's convenient for you is fine with me Dave...

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)