I live in Lompoc, Ca. That's in Santa Barbara County on the Central Coast of Cali. I just dropped my engine (see Wap, wap, wap) to reseal my heads. While it's out, I would like to get my tranny fixed. I already had the reverse/first synchro's done, but I can't get into second unless I hold my head just right. Cap'n, do you do tranny work? Can you or anyone recommend anyone locally. I am going to Pomona Sunday. What is a fair price for this work? Thanks in advance.
Bee Jay
I think the Crusty one does in fact do tranny work.
If ya ask reeeeaaally nice.
The Crusty One can be reached at....805-925-1993
I assume you have checked the slide clamp under the boot and replaced bushings FIRST?
I just pointed this out to the Cap'n. He's off to the bank to visit money (glad somebody has some to visit). He'll get back to you when he get's back.
Hi Mark. Thanks.
Yep. New bushings and shift rod adjusted plenty. Second is shot. Might as well get it fixed while the engine is out. Hopefully I can have the car running for the Ventura meet Sept. 11. I still hope to do the six conversion soon, so the tranny has got to be right.
Bee Jay
You might give John a call at the shop, I know he knows how (he just did a sideshifter conversion & gear replacement on one of mine). Whether he has time to do it is another matter.
I'll see you at GAF, the Blue car should have new paint by then (goes into the body shop on monday) and we'll have the SC in the Concours. Marcie has been polishing for weeks to get ready for tomorrow, the GAF in Sept will intitiate another round of cleaning/polishing.
QUOTE (Bee Jay @ Jul 15 2005, 02:05 PM) |
I live in Lompoc, Ca. That's in Santa Barbara County on the Central Coast of Cali. I just dropped my engine (see Wap, wap, wap) to reseal my heads. While it's out, I would like to get my tranny fixed. I already had the reverse/first synchro's done, but I can't get into second unless I hold my head just right. Cap'n, do you do tranny work? Can you or anyone recommend anyone locally. I am going to Pomona Sunday. What is a fair price for this work? Thanks in advance. Bee Jay |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)