Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 1970 914-6 ignition switch wiring orientation?

Posted by: mate914 Dec 13 2020, 11:23 AM

I am slowly putting back together my fathers 914 six. When I disassembled it 16 years ago I made notes where they went. The rodents made a nest of it.....
I researched and researched and I think I got it right. I would just like maybe someone who has info to share? Does this look correct? Maybe even a picture from the other side showing which holes are not used would also be helpful. Car number 597
Thanks you

Posted by: altitude411 Dec 13 2020, 03:11 PM

I'm subscribing to this thread... I went to get a picture of my harness for you but found I have an extra hot lead installed into the mix sooo, I too would like to know what is factory popcorn[1].gif

Here's pics of my six wiring with an extra hot lead in the mix... not sure what that is all about without some investigation. Maybe Clay or Mark could help us out with what is factory? @http://www.914world.com/bbs2/index.php?showuser=1143 @http://www.914world.com/bbs2/index.php?showuser=3457

Attached Image

Posted by: ClayPerrine Dec 13 2020, 03:34 PM

I guess I need to go take a picture of the plug in Elwood.

Clay

Posted by: altitude411 Dec 13 2020, 03:39 PM

Posted by: ClayPerrine Dec 13 2020, 04:07 PM

Here you go! From an unmolested 1970 Factory Six.

Attached Image

Right after I took the second picture, the wires fell out of the plug. I had to use the picture to put them back in the right spots.

Clay