Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ New Bursch 914-4 2.0 Exhaust
Posted by: russmoffat Jan 2 2021, 03:33 PM
Hi All,
My old Bursch exhaust for my 73 2.0 4 cylinder. The old one finally gave out and I have always really liked it. I see there is an old one for sale here already. Anyone know where I can get a new one or like-new one?
Thanks,
Russ
Posted by: tpines Jan 2 2021, 04:28 PM
There's one on ebay right now brand new for $350. Good luck!
Clark
Posted by: rhodyguy Jan 2 2021, 04:36 PM
If the piping is still sound, the muffler is easily replaced. Substantial savings+0 shipping $.
Posted by: russmoffat Jan 2 2021, 04:54 PM
There's one on ebay right now brand new for $350. Good luck!
Clark
Thanks Clark. I saw that. Unfortunately that one is for a six cylinder.
Posted by: russmoffat Jan 2 2021, 04:55 PM
If the piping is still sound, the muffler is easily replaced. Substantial savings+0 shipping $.
Interesting. Yes it is the main muffler part that has a hole and loose parts inside. You think most muffler shops can fix?
Posted by: ndfrigi Jan 2 2021, 04:58 PM
Or you should try Dave’s Triad muffler.
Posted by: aharder Jan 2 2021, 05:28 PM
www.burschexhaust.com
Posted by: mtn flyr Jan 2 2021, 05:42 PM
I have one with a few hours on it..
Posted by: Robarabian Jan 2 2021, 08:11 PM
Seems they dont support 914 anymore.
www.burschexhaust.com
Posted by: IronHillRestorations Jan 3 2021, 01:37 PM
I think I have a NOS 2.0 Bursch, but shipping to California will be spendy
Posted by: russmoffat Jan 3 2021, 01:57 PM
I have one with a few hours on it..
Willing to part with it? How much?
Posted by: russmoffat Jan 3 2021, 01:59 PM
I think I have a NOS 2.0 Bursch, but shipping to California will be spendy
How much do you want for it? How much you think for shipping?
Posted by: JeffBowlsby Jan 3 2021, 02:45 PM
When I had a Bursch I had a local shop weld on a Magnaflow muffler from Summit Racing to replace the original. Not expensive, looked good and had a great sound.
Posted by: mepstein Jan 3 2021, 03:12 PM
You could get one of ours. They are a little more expensive since they are handmade in USA from high quality stainless but you won’t have to buy a replacement every couple years. Available in side exit or dual rear exit.
Attached thumbnail(s)
Posted by: russmoffat Jan 3 2021, 08:59 PM
You could get one of ours. They are a little more expensive since they are handmade in USA from high quality stainless but you won’t have to buy a replacement every couple years. Available in side exit or dual rear exit.
How much are these? How’s the sound?
Posted by: mepstein Jan 3 2021, 09:23 PM
$595
I linked a sound clip but a muffler will not sound the same on different cars. A fuel injected car sounds different than a car with carbs, etc. The single side out will also be a bit quieter than the dual out.
These are also much lighter than stock or aftermarket.
https://youtu.be/E_9CVVIsij0
Posted by: russmoffat Jan 4 2021, 05:46 PM
$595
I linked a sound clip but a muffler will not sound the same on different cars. A fuel injected car sounds different than a car with carbs, etc. The single side out will also be a bit quieter than the dual out.
These are also much lighter than stock or aftermarket.
https://youtu.be/E_9CVVIsij0
Sounds good. I think I'd want the single out. Pipe is on the left, correct? How do I place an order?
Posted by: aharder Jan 4 2021, 07:12 PM
Seems they dont support 914 anymore.
www.burschexhaust.com
Interesting, I just got a replacement Muffler only about 6 months ago. They have a life time warranty. I worked with them just to send me the muffler only and it cost me around 50 bucks to keep my old one. They refub the tips, or that's what I was told
Posted by: russmoffat Jan 4 2021, 07:25 PM
Seems they dont support 914 anymore.
www.burschexhaust.com
Interesting, I just got a replacement Muffler only about 6 months ago. They have a life time warranty. I worked with them just to send me the muffler only and it cost me around 50 bucks to keep my old one. They refub the tips, or that's what I was told
I emailed them and left a VM, will let you know what they say.
Posted by: rick 918-S Jan 5 2021, 07:18 PM
http://www.914world.com/bbs2/index.php?showtopic=350847
If you need a better price I am open to offers.
Posted by: Mark Henry Jan 6 2021, 09:21 AM
I have a new bursch, at least I think it's a bursch.
It's for a 1.7 or 1.8 heater boxes, make sure you get the correct one for your heater boxes, the 2.0 version will not fit the 1.7/1.8 and vice versa.
It's on my wife's 914 but it hasn't been fired up, I also cut off the old tip and welded on a much nicer SS tip. I replaced the tip because the old tip wasn't centered correctly on the rear valance and it looked sucky. I believe this is old stock, maybe even 80's vintage.
I'd be willing to sell it because I have another bursch that's only been on a car for a short period. The 2nd one has surface rust and I would also be willing to sell this one (less money of course), I just need one or the other.
PM me if interested.
Posted by: Mark Henry Jan 6 2021, 09:25 AM
dp
Posted by: Jett Jan 12 2021, 12:59 AM
I bought a new muffler from 914Werk, but it had some storage scratches. Here is the original pic plus the new connecting pipe...
Note, I painted the muffler with matching high temp black paint and will add a pic tomorrow.
I ended up going with the stock 75 setup
Attached image(s)
Posted by: bbrock Jan 12 2021, 08:57 AM
I bought a new muffler from 914Werk, but it had some storage scratches. Here is the original pic plus the new connecting pipe...
Note, I painted the muffler with matching high temp black paint and will add a pic tomorrow.
I ended up going with the stock 75 setupFWIW, I bought a Bursch brand new in the late 80s and it came straight out of the shipping box looking worse than that one. I think the paint they used on those things was pretty crappy.
Posted by: Craigers17 Jan 15 2021, 04:55 AM
https://sfbay.craigslist.org/sby/pts/d/san-jose-porsche-914-bursch-exhaust/7262195819.html
@http://www.914world.com/bbs2/index.php?showuser=20002 ...there ya go.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)