Printable Version of Topic

Posted by: Morph914 Jan 5 2021, 10:46 AM

Do all of the throw out bearings have the two guides? #9 in the picture. When I took mine apart these were not there.

Posted by: rjames Jan 5 2021, 10:58 AM

There should be 2 of them.

Posted by: brant Jan 5 2021, 10:59 AM

you need these..
they often get reused, and then fall apart with age.
but you need them.

Posted by: ClayPerrine Jan 5 2021, 11:00 AM

Get new ones every time you do a clutch.

Clay

Posted by: Morph914 Jan 5 2021, 11:13 AM

Yay! More parts to buy. Thank you guys for chiming in

Posted by: rhodyguy Jan 5 2021, 11:18 AM

The retaining clip for the pivot is spent too. Replace the small ballcup bushing while you're in there.

Posted by: Morph914 Jan 5 2021, 11:51 AM

The retaining clip seems to be ok but I have replaced the ball cup. Thank you!

Cheers,
John

Posted by: roundtwo Feb 2 2021, 03:44 PM

Hello,
I'm going through the same process. Any other items need to be replaced before mating to the engine?- Replacing items 5, 8 and 9.

Is item #1 inside the transmission?
Thanks, Todd

Posted by: 914werke Feb 2 2021, 04:03 PM

While your in there ~
if you are cutting your flywheel vs new, consider you may need to shim the pivot ball out.