Trying to pull my tranny off my V8. Got everything out of the way und unbolted but can’t yank the tranny off the engine. Any secrets? Using a transmission jack but was hoping for some advice so I don’t break anything. Thanks
You have to support the engine as close to the flywheel as possible.
If not, you will have a difficult and dangerous situtation.
support the engine and lift the trans enough to remove the overhung weight. It should separate with little effort.
Got it off. I thought I could get it off with adapter plate attached but after unbolting the granny to the plate, it came off. Off to Doctor Evil! Thanks all
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)