Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Jake Raby solid rocker arm spacer kit clearance

Posted by: Geezer914 Feb 14 2021, 06:05 PM

I have a solid rocker arm shim kit from Jake Raby. Any one know what the overall clearance should be? Thanks

Posted by: Montreal914 Feb 14 2021, 06:45 PM

Maybe ask Raby, the original seller? confused24.gif

Posted by: zig-n-zag Feb 15 2021, 12:57 AM

I clearance rocker side play to .005” or less.

Posted by: Mark Henry Feb 15 2021, 05:30 AM

I'm not so worried about a tight spec as I'm about being sure there's no binding of any rocker.
I make my own spacer kit and rocker mount studs.

Posted by: Geezer914 Feb 15 2021, 07:40 AM

Found it, .004-.006", so .005 is correct. Thanks for the responses.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)