914World.com [Powered by Invision Power Board]

Posted by: Mikey914 Feb 16 2021, 01:00 PM

Trying to help out a few guys that might need these. Set of 4 center caps for the stock wheels. These are polished unlike the satin ones we 1st did and are still available.

$99 a set but need 10 takers to make this work. Will be limiting the quantity as to not blow out all my stock

Who's in?

Attached image(s)

Posted by: yellowporky Feb 16 2021, 02:33 PM

Me please

Posted by: BillJ Feb 16 2021, 02:38 PM

i am in

Posted by: second wind Feb 16 2021, 02:50 PM

How is the fitment? Wasn't there some of these out there that didn't fit very well? I have original fuchs. Thank you very much.
gg

Posted by: Mikey914 Feb 16 2021, 03:38 PM

The very 1st ones I made had a clearance issue on the front.
We corrected it and then fit just like the OEM part.
Only you can tap them out with a hammer on the back side without deformity them.

Funny thing someone copied my 1st part that was flawed and started making them without checking. Karma I guess.

Posted by: BillC Feb 16 2021, 03:42 PM

I'm in, too.

Posted by: second wind Feb 16 2021, 09:22 PM

Okay sounds great....as long as they fit I am in for four.....thank you...WoooHooo!!
gg

Posted by: Mikey914 Feb 17 2021, 12:04 AM

Rrrockhound

Added from.other thread

5 sets left

Posted by: VoPo914 Feb 17 2021, 10:43 AM

I'm in for a set.

Posted by: second wind Feb 17 2021, 01:45 PM

Hello Mikey....so somewhere in this tread but I couldn't find it again someone said the lip is not identical to the stock cap....is this a fact? Do tell.....thank you very much.
gg

Posted by: chrisg Feb 17 2021, 02:12 PM

I’d like in on a set, please.

Posted by: Mikey914 Feb 17 2021, 02:39 PM

On the earlier run the flange was a little bigger our current production we have made them more like OEM. Can't tell the difference when they are not next to each other
Here's a pic
New vs old

Attached thumbnail(s)

Posted by: TJB/914 Feb 17 2021, 04:24 PM

I am in for a set if still open.
Tom

Posted by: stevend914 Feb 17 2021, 04:25 PM

Two sets please

Posted by: mmichalik Feb 17 2021, 06:17 PM

I'll take a set as well.
Thanks guys!

Posted by: second wind Feb 17 2021, 07:19 PM

Wow....the difference on the width of the flange/lip/whatever is barely a bch....(ch, bch,rch)....would love to hear if anyone knows what I am talking about hear....anyway thank you Mark and bring it on!!
gg

Posted by: Mikey914 Feb 18 2021, 01:27 PM

Looks like one set remains

Posted by: JamesM Feb 18 2021, 03:56 PM

QUOTE(Mikey914 @ Feb 18 2021, 12:27 PM)

Looks like one set remains

Alright, im in.

Posted by: yellowporky Feb 21 2021, 02:08 PM

Mark @http://www.914world.com/bbs2/index.php?showuser=3348 ,
Thank you for doing this. i did order mine and the code that you sent to me did not work so i pm'd you and got no response then i called a couple times to the shop and only got voicemail. i left a message regarding the situation but no call or credit back for the difference. Not a fan of having to chase around something like this.
Chris

Posted by: tyfighter123 Feb 21 2021, 08:28 PM

I am in for a set!

Posted by: Rods914 Feb 21 2021, 09:15 PM

If someone drops out I would like a set.

Posted by: Mikey914 Feb 22 2021, 03:55 PM

QUOTE(yellowporky @ Feb 21 2021, 12:08 PM)