Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Sorensen injector 1.7 any good?
Posted by: Sprout Mar 11 2021, 04:10 PM
Anybody used these: 800-1108n before? Any good?
Posted by: 914Sixer Mar 11 2021, 07:18 PM
New or rebuilt?
Posted by: Sprout Mar 11 2021, 08:03 PM
New or rebuilt?
Thanks, these would be new ones. Autozone can get them for about $70.
Posted by: Sprout Mar 11 2021, 08:28 PM
Came across this thread discussing the Standard Motor Products injectors and the good flow test that was done on the FJ67 by Mr. Injector, so found their FJ114 injectors for 1.7 and ordered. Fingers crossed!
http://www.914world.com/bbs2/index.php?showtopic=343970&hl=sorensen
Posted by: 914Sixer Mar 12 2021, 07:13 AM
You should be good to go.
Posted by: Jmkorfha Mar 12 2021, 02:13 PM
I put one in last year. Worked perfectly.
Posted by: Sprout Mar 16 2021, 06:48 PM
Thanks, all! I got the FJ114 and SK3 seal kit. Installed and running great. Even if it lasts half as long as the Bosch's 48 years, I'll be happy!
https://www.amazon.com/Standard-Motor-Products-FJ114-Injector/dp/B000C7Y4LM/ref=sr_1_2?dchild=1&keywords=fj114&qid=1615941750&sr=8-2
Posted by: sjhenry1075 Mar 17 2021, 07:27 AM
I put one in last year. Worked perfectly.
When you say you put "one" in, you meant that you only replaced one of your injectors, correct? I will be doing the same thing but was unsure how it would work with the others (that are different).
Posted by: Jmkorfha Mar 17 2021, 08:42 PM
I put one in last year. Worked perfectly.
When you say you put "one" in, you meant that you only replaced one of your injectors, correct? I will be doing the same thing but was unsure how it would work with the others (that are different).
Yes. One of my originals was leaking between the plastic and metal body. I installed one new one from autozone and it runs perfectly.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)