How many fly wheel marks are supposed to be on the flywheel? It was my understanding that there was only supposed to be one mark which was to identify top dead center for cylinder 1. I will attach a photo of the indentation and video of the two holes in flywheel.
https://youtu.be/GxzlaOsOHAA
Attached thumbnail(s)
Some people marked there flywheels at 180 and 90 degrees so they could adjust the valves from the bottom of the car by rotating one wheel
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)