Printable Version of Topic

Posted by: Tdskip Mar 14 2021, 06:27 PM

If I am using Ben’s tank or all of the ancillary seals and fittings from PET the right ones to order? I assume so but wanted to check real quick.

So #46 and 48 etc all PET part numbers from regular vendors (and Ben as much as possible)?

Posted by: mepstein Mar 14 2021, 07:41 PM

46 is the rubber gasket that surrounds the oil filter console. 48 is an overpriced foam ring.

Posted by: Tdskip Mar 15 2021, 07:04 AM

Thanks Mark, sounds like I should look at the alternatives discussed here.

Posted by: Tdskip Mar 15 2021, 07:05 AM

Thanks Mark, sounds like I should look at the alternatives discussed here.

Posted by: mepstein Mar 15 2021, 07:54 AM

46 is needed. The metal ring -45- fits into it. Both 45 and 46 are 911 parts as well so they are easy to find. I purchased both the foam rings (2 different sizes) at Sunset Porsche. they are $40 each. Ben told me he uses foam hardware tape. Probably works just as well as the overpriced foam rings.

Posted by: gms Mar 15 2021, 08:10 AM

Uro parts makes a nice #46 rubber seal

Posted by: roblav1 Mar 15 2021, 06:50 PM

I made my own #48 from foam and hole saws.

Posted by: Tdskip Mar 15 2021, 08:01 PM

Thanks gentlemen, appreciate the information and tips.

Posted by: Tdskip Mar 16 2021, 03:06 PM

Just to try to contribute something back here it turns out that Pelican has all the stuff in stock, and the prices seem workable, if not quite cheap.

Posted by: 930cabman Mar 16 2021, 06:20 PM

Not far behind you TDskip, thanks for posting