I have a 350mm Dino steering wheel in my car now which I like. However, last year I had my right knee replaced (painful, but worth it!) and now it’s real hard to squeeze in under the wheel. I have been looking at getting one of the Momo wheels that are flat on the bottom as a replacement to ease entry/exit. Will the hub I have now for the Dino work for the Momo?
Appreciate any advice.
Thanks in advance,
Rick
Momo generally uses a 70mm bolt circle.
Dino and Nardi generally use a 74mm bolt circle.
Luisi is different than Momo as well, I don't recall its bolt circle.
There are bolt-on adapter plates out there to use different wheels on Momo hubs.
There was a thread on here a while ago for a steering wheel hub with a quick release. I bought one and it has arrived in the UK a couple of weeks ago. It is a work of art for the price and would solve your problem. It is drilled for both PCD’s. Next time I am on the laptop I will find the thread and post the link.
Thanks guys, I’ll look for an adapter.
https://www.amazon.com/gp/product/B0132K7SKO/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
This was the quick release hub. Quality is amazing for the price.
SR
Very cool, I have a Dino wheel on mine and was always wondering about this.
Which of the 4 options is the one that works?
I'm not familar with that specific product, but it appears only the one on the left is drilled and threaded for two different bolt circles.
I have personally used this adapter/spacer to install a Momo steering wheel onto a Luisi hub adapter on my race 914:
https://www.ogracing.com/collections/car-steering-wheels/products/omp-steering-wheel-spacer-60mm
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)