Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Rear Shock (Bilstein) Hardware Needed
Posted by: pilothyer Mar 26 2021, 04:29 PM
I am in need of #1 thru #5 to install a new set of Bilsteins on the rear of my 914. Any ideas on where to source these.
Posted by: mepstein Mar 26 2021, 04:44 PM
914rubber has the rubber parts and you should be able to get the rest from an old pair of shocks. I think the stock Boge's use the same hardware.
Posted by: pilothyer Mar 26 2021, 04:50 PM
914rubber has the rubber parts and you should be able to get the rest from an old pair of shocks. I think the stock Boge's use the same hardware.
Now if I could just remember where I put all that
Posted by: JamesM Mar 26 2021, 05:34 PM
#3 & #4 914rubber should be able to hook you up
#1 should have came with your new bilstiens, its just a nyloc nut
#2 and #5 (91433351500 and 91433351600) Seem like something Bruce Stone might have a few of, otherwise Autoatlanta
I am in need of #1 thru #5 to install a new set of Bilsteins on the rear of my 914. Any ideas on where to source these.
Posted by: pfreiburger Mar 27 2021, 08:20 AM
Which Bilsteins are you installing? I would appreciate your comments afterwards regarding how they changed the ride & handling. Thanks, Paul.
Posted by: pilothyer Mar 28 2021, 09:03 PM
Which Bilsteins are you installing? I would appreciate your comments afterwards regarding how they changed the ride & handling. Thanks, Paul.
Posted by: pilothyer Mar 28 2021, 09:08 PM
Which Bilsteins are you installing? I would appreciate your comments afterwards regarding how they changed the ride & handling. Thanks, Paul.
I am also using the Ground Control Coil-Over Setup.
Posted by: pfreiburger Mar 28 2021, 09:33 PM
Thanks, looking forward to your feedback.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)