Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ An attempted turbo 6 with a hitch (as in trailer)

Posted by: JeffBowlsby Apr 4 2021, 10:54 AM

A 74?...not likely.

A heat sink?

And what is that drag chute looking thang in the back?

https://www.ebay.com/itm/1974-Porsche-914/224348635275?hash=item343c38808b:g:em4AAOSwQpZgHEjZ


Attached image(s)
Attached Image

Posted by: fixer34 Apr 4 2021, 12:26 PM

I believe there was a thread on this one a month or so ago. Dual turbo 911 engine??

Posted by: Tom_T Apr 4 2021, 01:20 PM

Jeff -

Lacking an actual VIN shown anywhere - it could be a 74+75/76 Frankenteen.

The 914 hitch looks like it could be one of these H&H aftermarket ones from back in the day -

Attached Image

Attached Image

& this 914's hitch:
Attached Image


PS- If this hitch is an H&H, then it appears to be modified without the rearmost crossbar supports up to the rear trunk structural crossbrace due to the wider-longer 911 -6 implant, ergo the bigger 6 bolt center plate at the bottom. Not sure, but that's my guess.

beerchug.gif
Tom
///////

Posted by: rgalla9146 Apr 4 2021, 04:45 PM

It has an aluminum 911 block ( 65-68.5) with mechanical fuel injection which
was never a factory combo 2.1 litre ? that's a 2.4 with one dead cylinder.
It has two turbos and a pair of flux capacitors.
It is also prepared for towing with a 911 trombone oil cooler moved to the rear.
Front trunk touring package.
High performance plumbing equipment.

Posted by: Andyrew Apr 5 2021, 02:44 PM

That is a really interesting car with some really funky stuff done to it!

Posted by: Chris914n6 Apr 5 2021, 07:29 PM

That is just the BRB skin screwed onto the steel bumper. For aero or ???

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)