I’m trying to get all my fuel and vacuum hoses connected, and I know the general area this is supposed to be mounted but if someone had a pic that would be most helpful.
Thanks in advance,
John
Here is the little bugger
And here is a diagram of the general vicinity
sorry, picture of wrong part.. deleted.
How about THIS one
Red circle, it sits downwards.
Attached image(s)
Plus it has a 90* rubber elbow and steel nipple to get the 1/2 side vent hose and the hose that comes off the top nipple has another 90* rubber elbow and steel nipple where it meets the air cleaner housing.
Mark beat me to it, but here's another shot (since I walked ALL the way out to the garage for you )
Sort of in the center of pic. I believe it's the "anti flashback valve."
It seems all I have to do is post something and then I find it shortly after. Found this pic which shows where it’s mounted.
Wasn't my pic in this thread but I'm doing a couple of full 2.0 Djet restorations right now, a couple of 1974 2.0 and a couple of 1975 2.0's.
There's slight differences between the two engines.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)