Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Junkyard alert in PA
Posted by: jaredmcginness Apr 16 2021, 11:56 AM
Hey guys,
A friend of mine reached out and said he saw one of those cars I like at the pull a part.
Harry's U Pull in Hazleton.
I do not know anything about the car so I cant answer questions.
It is definitely a piece of crap but MAYBE there is something here that can help someone local.
(Heat exchangers, doors, fogs, etc) That bumper rubber looks better than mine though!
Good luck, someone grab the vin.
Posted by: 930cabman Apr 16 2021, 12:33 PM
Tons of good parts, someone grab them
Posted by: StarBear Apr 16 2021, 12:49 PM
Hey guys,
A friend of mine reached out and said he saw one of those cars I like at the pull a part.
Harry's U Pull in Hazleton.
I do not know anything about the car so I cant answer questions.
It is definitely a piece of crap but MAYBE there is something here that can help someone local.
(Heat exchangers, doors, fogs, etc) That bumper rubber looks better than mine though!
Good luck, someone grab the vin.
Yes; grab the VIN!
Posted by: mepstein Apr 16 2021, 01:00 PM
Looks like they took the low hanging early fruit like the steering wheel, early side and interior mirror and rear valance.
I would part it if it was free to me but there’s not much left unless you need a specific part.
Posted by: davep Apr 16 2021, 01:05 PM
Good luck, someone grab the vin.
Grab the VIN and try and get the paint code plate data (Karmann # & paint code)
Posted by: Dion Apr 16 2021, 09:05 PM
According to the website this is the listed vin 4732903656
Added to database.
Posted by: mate914 Apr 17 2021, 05:38 AM
East coast car... 
Hazelton is like going to Cape Town, South Africa. I have been to this u-pull it.
Matt
Posted by: StarBear Apr 17 2021, 07:14 AM
According to the website this is the listed vin 4732903656
Added to database.
Thanks!
Posted by: Jonathan Livesay Apr 17 2021, 09:49 AM
That setup makes the worst Harbor Freight jack stands look like safety overkill.
Posted by: fixer34 Apr 17 2021, 07:36 PM
That setup makes the worst Harbor Freight jack stands look like safety overkill.
Actually a lot of yards are doing this. If you look closely, the vertical rim is welded to the one laying flat. So basically a fixed jackstand with a wide base. This one has about 5 of them, I don't think it's going anywhere...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)