Posted by: Steve Apr 28 2021, 08:56 AM
I have early 3.5" boge non hub centric front struts. Can I just replace the hub with a later hub centric hub or do I have to replace the whole strut?
Posted by: mepstein Apr 28 2021, 10:03 AM
I can’t guarantee the caliper/rotor spacing but both hubs are interchangeable on the strut and use the same bearings.
Posted by: bdstone914 Apr 28 2021, 03:11 PM
QUOTE(Steve @ Apr 28 2021, 07:56 AM)
I have early 3.5" boge non hub centric front struts. Can I just replace the hub with a later hub centric hub or do I have to replace the whole strut?
Yes it should fit. The height difference affect the distance to the wheel surface not the rotor mounting surface. I was looking at a pair of non hub centric 911 hubs and it loks like an adapter ring could be make to convert them to hub centric.
@http://www.914world.com/bbs2/index.php?showuser=822