Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Interior rearview mirror

Posted by: saigon71 May 7 2021, 04:43 PM

I found this gem in a box of parts I bought last Sat. It's an early interior rearview mirror in very good shape, but the glass is cracked.

Can this glass be replaced? Source?

Thank you.

Attached Image





Posted by: Tom_T May 7 2021, 04:48 PM

QUOTE(saigon71 @ May 7 2021, 03:43 PM) *

I found this gem in a box of parts I bought last Sat. It's an early interior rearview mirror in very good shape, but the glass is cracked.

Can this glass be replaced? Source?

Thank you.

Attached Image


Possibly by a local automotive glass & mirror shop, but they're still available new & used all over, & it may not look perfect after being opened up - depending on the shop tech's skills.

It's the same mirror as used on 1960s-70s 911/912/912E/930 cars too.

beerchug.gif
Tom
///////

Posted by: Cairo94507 May 7 2021, 04:50 PM

I would bet it can be. I had a 2004 BMW M5 that had an issue with the rear view self-darkening mirror. They wanted like $500 for a new mirror. I located a place that repairs rearview mirrors on-line and they replaced the glass for about $110 dollars. That was maybe 8 years ago. I do not recall the company name and gave the receipt to the purchaser when I sold the car.

Posted by: PanelBilly May 7 2021, 05:26 PM

I asked this same question about two weeks ago. I was told that I might be able to socten the rubber that holds the glass in by heating it in boiling water. Didn’t work.

Posted by: rgalla9146 May 8 2021, 07:09 AM

The plastic is very tough.
I ruined one in the interest of science.
It was wobbily anyway so hacked it up to see the innerds.
It must have been assembled originally as a pliable shell because there is a screw
inside that is inaccesible after the glass is installed.
The wobbily mount was easily remedied (loose screw) with the glass removed.
Immerse in boiling water to allow assembly ?


Attached thumbnail(s)
Attached Image

Posted by: 76-914 May 8 2021, 09:06 AM

An alternative is to buy the BMW early style. They mount in the same place the center visor mount resides. They accept your current visor pegs to no modification needed. I've bought 2 from the same guy on eBay. His name is Mac. IMHO these are a major improvement over the 914 mirror because I don't see 1/2 window and 1/2 cab anymore. beerchug.gif

Posted by: Montreal914 May 8 2021, 10:59 AM

Looking for a BMW rear view mirror replacement to the 914 stock one.

Searched for "Mac" seller on Ebay, but no seller found. sad.gif

Posted by: FlacaProductions May 8 2021, 11:09 AM

https://www.ebay.com/itm/353487053885?hash=item524d78643d:g:ItkAAMXQQJBQ8El7

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)