Printable Version of Topic

Posted by: theghoul May 11 2021, 01:38 AM

Hi! working on the 914 73 2.0 to return it to fuel injection from the single carb- have one of the dual fuel tubes but other one is broken and I do not have all the peices to reweld- if anyone has one I can purchase I would appreciate it! thanks, bob

Posted by: Spoke May 11 2021, 03:42 AM

Check with Tangerine Racing. They have complete sets for sale. I purchased a set when going from single carb back to FI.

Posted by: ChrisFoley May 11 2021, 05:31 AM

I'm sure I have some spare fuel rail pieces, but its not something I ordinarily sell. They only rarely need replacing.
Most anyone who's disassembled 914 engines probably has a few of them hanging around.

Posted by: rfinegan May 11 2021, 06:49 AM

Pm me, I am sure I have one you can have...Just want to make sure we
are talking about the same part...
-Robert

Posted by: rfinegan May 11 2021, 06:49 AM

can you post a pic of what you need?

Posted by: theghoul May 20 2021, 10:31 PM

Hi! Hope to provide pix of the tubes I need - not sure if "fuel tube" is the proper name - has 2 sets of intake tube for vaporized fuel - lets see if I can provide the picture! thanks, - you can email me for that at bobtheatre@aol.com -thanks, theghoul

Posted by: bdstone914 May 20 2021, 11:17 PM

.
@http://www.914world.com/bbs2/index.php?showuser=25401
They are called fuel rails.
I have them. Which one do you need? The one pictured is a drivers side. The oassenger side does not have the test port. It will hit the MPS.
Mine are replated. I also have sets of replated injector hokd down brackets.

Posted by: 914sgofast2 May 21 2021, 12:04 AM

Do you need the intake manifold or the gas line? The photo makes me think you broke one of the large grey intake manifolds if the broken piece is in the background of your photo.

Posted by: Mark Henry May 21 2021, 04:07 AM

Good eye!


Are you trying to make the 3-bolt intake runner/manifold fit a 4-bolt head?
It won't work well, the intake ports don't match.
You're better off to get the correct intake runner/manifold for the heads you're using.

Show us what you're trying to do, I'm sure a member will find you the correct parts for reasonable cost.

Posted by: davep May 21 2021, 10:14 AM

If it is a 2.0 3 bolt intake runner (airbox to head) that the injectors mount on to, Then I have an orphan part to sell. If you need 1.7 runners, then I have 6 sets available. Fuel distribution lines I have several sets.
Dave

Posted by: theghoul May 23 2021, 12:39 AM

Thanks - the one in center of pix is the complete unbroken one- the one on upper right is missing the other tube and that assembly is what I need- thanks, theghoul

Posted by: rfinegan May 23 2021, 06:57 AM

Sorry, I do not have that part for a Djet

Posted by: davep May 23 2021, 07:14 AM

Mark, you have that lone 2.0 runner with you I believe?
@http://www.914world.com/bbs2/index.php?showuser=26